728 x 90

Top 10 Questions Everyone Should Answer in 200-301 CCNA Exam:

Top 10 Questions Everyone Should Answer in 200-301 CCNA Exam:

Are you curious about knowing the top 10 questions that you should answer in the CCNA exam? Then read our complete article. Here, we will only tell you about the top 10 questions.  If you want to attempt the 200-301 CCNA exam, then you need to know that it is a very difficult test in

Are you curious about knowing the top 10 questions that you should answer in the CCNA exam? Then read our complete article. Here, we will only tell you about the top 10 questions. 

If you want to attempt the 200-301 CCNA exam, then you need to know that it is a very difficult test in the field of IT. Most people think that it is not too difficult, but it is wrong. If you want to go into the IT field, then you have to face this hard exam. 

Top Compulsory 200-301 CCNA Exam Questions:

1. Which LAN switching method is used in CISCO Promoter 5000?

Cisco promoter 5000 uses the collection and send switching process. In this process, the buffer collects the complete information, and then it is checked by CRC. After that, it decides whether to send this information or not.

2. What is the need for the Data Link?

The main function of the data link is to notice whether texts are sent to a suitable device or not. Further, it also helps in structuring.

3. What is the key benefit of using switches?

The switches receive signals, and then these signals make a frame. Using this method, it can approach and check the desired address. Then it sends this frame to the right device.

4. When does network congestion occur?

When several users are using the same bandwidth, then automatically, it results in system blockage. This problem is mainly in large systems that don’t have the option to make different systems.

5. What is a Window in networking terms?

A window is the number of sections, and these sections are permitted to go from origin to different locations. It is done before a response is sent back.

6. How does cut-through LAN switching work?

In this type of switching, the adapter gets the information and instantly forwards it to succeeding sections of the network. It has done after reading the target location.

7. Utilizing RIP, what is the end requirement when it comes to the number of hops?

When we talk about the number of hops in the RIP, then the maximum hops are 15. If the number exceeds 15, then it shows that system is not in reach.

8. What is a Frame Relay?

It is a WAN process that helps to make and maintain virtual boundaries for communication. This process is highly performing and works at the physical levels and information links.

9. How do you configure a Cisco router to route IPX?

Firstly, apply the IPX steering button and enable it. All the interfaces present in the IPX system are undergoing configuration with a number of systems.

10. What’s the easiest way to remotely configure a router?

The Cisco automatic fixing methods are the best option for the remote configuration of an adapter. Though, it is necessary to link the adapter with the WAN using one interface.

Final Verdict:

Finally, we have discussed the top 10 questions that you should answer in the 200-301 exam. If you want to pass out the exam, then you should study from different resources, materials and join different courses. If you have all the concepts, then you can pass the exam on the first try.

editor
ADMINISTRATOR
PROFILE

Posts Carousel

Leave a Comment

Your email address will not be published. Required fields are marked with *